Rigid Float Tonearm
Rigid Float Tonearm | "Evanui "signature | Technology | Distributors |
Absolutely brand new tonearm with the OIL FLOATED PIVOT
and the NO OFFSET-ANGLE STRUCTURE.
Easy installation, no dorilling is needed.
About “Rigid Float” tonearm
OIL FLOATED PIVOT
The ViV lab.’ s original OIL FLOATED PIVOT not only gives perfect bearing performance
but also insulates the arm wand from the vibration via floor or turntable. At the same time,
this pivot shuts out the reflection of vibration generated by the stylus. As the result, the
sound has highest purity with dinamics, sharp focus and very low distortion. We are sure
no one has ever experiensed such a sound from vinyl disks.
NO OFFSET-ANGLE STRUCTURE
We believe that elbowed shaped arm with offset angle and overhang setting affect seriously
to the sound quality because of side force fluctuation, which can never be canceled by
anti-skating machanism. So we dare to choose completely straight (i.e. NO OFFSET-ANGLE)
structure. You may ask “What about trucking error?” , and the answer is, “The trucking
error is a little bigger, but the sound is much better.”
EASY INSTALLATION
Not like other tonearms, “Rigid Float/H” is very easy to install. You do not have to drill your turntable plinth nor lift up so heavy turntable, just put it anywhere on your turntable plinth. You can also put it outside the plinth of your turntable.
Silk jacketed 4N silver inner wire and rhodium plated terminals ensure minimum signal loss.
The flagship model “Rigid Float CB” with the carbon fiber wand and the standard model
“Rigid Float Ha” with the aluminum wand.
2 color variations (Black Metallic, Black&Gold) and 3 length variations (7” , 9” , 13” ).
Azimuth adjustable
The original headshell “Nelson Hold” attached
![]() ![]() The cartridge is holded tightly by the center thumb screw as “Nelson Hold” . |
The center thumb screw presses and supports the cartridge’ s
magnetic circuit tightly, Light weight and less resonance
design. Any cartridge will be improved totally. connector:rhodium plated, double fix pin length:97mm weight:12.5g lead wire:4Nsilver / rhodium plated connector |
Specifications | |||
model | Rigid Float CB7 Rigid Float Ha7 |
Rigid Float CB9 Rigid Float Ha9 |
Rigid Float CB13 Rigid Float Ha13 |
eff. length | 7” ~8” | 9” ~10” | 13” ~14” |
underhang | 5~20mm | ||
base diameter | 90mm | ||
weight | about 2kg |
