|
Power Amplifier (DL system)
|
|| LineControlPreamp || ReferencePhonoPreamp || PhonoEqualizerPreamp || PowerAmp || IntegratedAmp ||
M-8000
Mono Block Monaural OTL Power Amplifier
Ultimate power amplifier designed in commemoration of our 45th anniversary
16 Phillips OTL tubes are pararelly linked to draw 130W/8 ohm power.
SRPP amplified 1st stage output with low impedance is gain controlled before directly flown into phase inversion circuit for clearer outline and deeper sound. |
 |
| Specifications (subject to change without prior notice for improvement) |
| Output Power: |
210W/4 ohm 130W/8 ohm 80W/16 ohm |
| Frequency Response: |
Frequency Response: 10~100KHz -2dB |
| Input Sensitivity: |
Input Sensitivity: 0.8V/130W/8 ohm |
| Residual Noise: |
less than 1mV |
| Power Source: |
120, 230VAC (50/60Hz) 530W (1050W at effective output) |
| Size: |
380mm (15")Wx220mm(8.7")Hx620 mm(24.4")D |
| Weight: |
40kg |
| Tubes used: |
42KN6x16, 6H30x2, 12BH7Ax2 |
| Presence Switch: |
NF1dB/2dB/3dB switchable |
|
M-8V II
Mono Block OTL system Power Amplifier
Incomparably different tone from standard output transformered tube amps, giving reality and majesty in sound and tone
Even low sensitivity speaker systems can be driven with powerful output and wide sound range |
 |
| Specifications (subject to change without prior notice for improvement) |
| Output Power: |
120W(8 ohm), 160W(16 ohm) |
| Frequency Response: |
10Hz ~ 120KHz +0 -dB |
| Input Sensitivity: |
1.4V/120W(8 ohm) |
| Power Source: |
120, 230VAC (50/60Hz) 280W |
| Size: |
320mm (12.6") W x 200mm (7.9") H x 470mm (18.5") D |
| Weight: |
32kg (70.6lbs) |
| Tubes used: |
EL509 S/6KG6 x10, ECC99/12BH7A x5 |
|
MS-300B
Stereo OPT Power Amplifier
300B directly heated triode tubes (8 pieces for both channels) in parallel push-pull circuit for 60Wx60W/8 ohm output with wider dynamic range to easily drive even low sensitivity speakers in good combination with Mactone's original OPT (output transformers). |
|
| Specifications |
| Output Power: |
60W + 60W/8 ohm |
| Frequency Response: |
10Hz ~ 100KHz +0/-3dB |
| Input Sensitivity: |
1.2V |
| Input Impedance: |
100K ohm |
| Load Impedance: |
3~16 ohm |
| Residual Noise: |
less than 0.8mV |
| Power Source: |
120, 230VAC (50/60Hz) 370W |
| Size: |
465mm(18.3")W x 225mm (8.9")H x 365mm (14.4")D |
| Weight: |
26Kg |
| Tubes used: |
300B x 8, ECC99/12BH7Ax4, ECC82/12AU7x2 |
| Input level control (L,R) and Presence (NF 1.5dB/4dB/50Hz+3dB) switch provided |
|
MA-300B
Stereo OPT Power Amplifier
Delicate, soft, and easy to listen sound with direct heating triode 300B
Output transformer designed by Mactone for wider range of sound and less distortion |
 |
| Specifications |
| Output Power |
23W+23W (8 ohm) |
| Frequency Response |
10Hz ~ 90KHz +0 -1dB |
| Input Sensitivity |
0.5V/23W (8 ohm) |
| Power Source |
120, 230VAC (50/60Hz) |
| Power Consumption |
260W |
| Size |
290mm (11.4")W x 210mm (8.3")H x 390mm (15.4"D |
| Weight |
17Kg (37.5 lbs) |
| Tubes used |
300B x4, ECC99 x2, ECC82 x1 |
|
MH-300B
Stereo OPT Power Amplifier
300B triodes in push-pull and Mactone's own output transformer with ECC99 driver circuit adopted in pursuit of natural sound. Input level control equipped for direct connection to a CD transport, etc. |
|
| Specifications |
| Output Power |
23W+23W (8 ohm) |
| Frequency Response |
20Hz ~ 90KHz +0 -1dB |
| Input Sensitivity |
0.5V/23W (8 ohm) |
| Power Source |
120, 230VAC (50/60Hz) |
| Power Consumption |
130W |
| Size |
420mm (16.5")W x 210mm(8.3")H x 305mm (12")D |
| Weight |
17Kg (37.5 lbs) |
| Tubes used |
2A3x4, ECC99x2, ECC82x1, 300Bx4, ECC99 x2, ECC82 x1 |
| Product comes with front cover same as MH-34 photo. |
|
MA-34
Stereo OPT Power Amplifier
Ultra linear push-pull universal amplifier. Power sound in dynamic range from El-34PP high power tube. Easily drives low sensitivity speakers. Interior parts foot lighted by blue LED. |
|
| Specifications |
| Output Power |
35W+35W (8 ohm) |
| Frequency Response |
20Hz ~ 80KHz +0 -1dB |
| Input Sensitivity |
0.8V/40W (8 ohm) |
| Residual Noise |
below 1mV |
| Power Source |
120, 230VAC (50/60Hz) |
| Power Consumption |
180W (230W at max. input) |
| Size |
290mm (11.4")W x 210mm (8.3")H x 390mm (15.4")D |
| Weight |
17Kg (37.5 lbs) |
| Tubes used |
EL34/6CA7 x 4, ECC99 x 2, ECC82 x 1 |
|
|| LineControlPreamp || ReferencePhonoPreamp || PhonoEqualizerPreamp || PowerAmp || IntegratedAmp ||
|
 |
