|| 47 Special Models || SHIGARAKI Series || Analog || Cable || Speaker ||
Model 4724 Koma Turntable
Model 4726 Tsurube Tone arm with Armlift
|
 |
| 4724 Koma Specifications |
| Drive System: |
DC motor Belt Drive |
| Platter: |
Two 15mm thick pure aluminum platters rotate opposite direction each other by a single drive belt. |
| Bearing: |
Magnetic Float System |
| Speed Range: |
Variable from 33rpm to 45rpm (with a continuously variable potentiometer) |
| Base Board: |
20mm thick pure aluminum |
| Horizontal Adjustment: |
Three-point support (with two height adjustable stainless steel bolts) |
| Size: |
400w x 200H x 350D mm |
| Power Supply: |
Separate PSU (comes with KOMA) |
| 4726 Tsurube Specifications |
| Type: |
Mass Separation System |
| Stylus Pressure Impressing: |
Weight Shifting on the sub-arm |
| Mechanical Subsonic Filter: |
Micro brush ahead of the headshell follows a record's warp. |
| Output Terminal: |
RCA jack |
| Other features: |
Adjustable arm base, weight type inside force canceller, arm lift |
|
Model 4723 MC Bee MC Phono Cartridge
| Specifications |
| Output Voltage: |
0.3mV (1KHz, 5cm/sec. |
| Internal Impedance: |
5ohm |
| Channel Separation: |
25dB or more (1KHz) |
| Channel Balance: |
below 1.0dB |
| Frequency Response: |
20~20,000Hz |
| Compliance: |
12x10-6cm/dyn |
| Stylus Pressure: |
1.8~2.2g |
| Cantilever: |
hard aluminium pipe |
| Stylus: |
Special Elliptical Diamond |
|
 |
|| 47 Special Models || SHIGARAKI Series || Analog || Cable || Speaker ||
|
 |
